|
Home
Air Refiner
Batteries
Dual Dynamics
Fleetguard
Hot-Shot
Innovative Tech
Nelson
Philatron
Peterson Mfg Co
Retrac Mirrors
Scooters
About Us
| |
| Order
Numbers |
Pack |
Std.
Carton |
M305A
M305R |
amber turn signal
red stop or tail light |
mfg. pack
mfg. pack |
36
36 |
 |
 |
FARM &
CONSTRUCTION
VEHICLE LIGHT
|
 | Low profile stop & tail light and turn signal
|
| Designed specifically for agricultural or construction vehicles
|
| Lexan® base and lenses are heat and impact resistant |
| May be mounted horizontally or vertically
|
| Designed to be used on vehicles either under or over 80" wide
|
| red lamp provides stop and tail functions while amber lamp serves as
turn signal or flashing warning light |
|
| Order
Numbers |
Pack |
Std.
Carton |
V306R
M306R |
red
red |
Viz Pack
mfg. pack |
6
48 |
 |
 |
RECTANGULAR SURFACE
MOUNT
Stylized Lexan® lens features pillow optics for maximum light dispersion.
Double filament bulb provides stop, turn and tail functions. See 306A
or 393A
turn signals and 393C
backup for companion models. |
| Order
Numbers |
Pack |
Std.
Carton |
| V339-2 |
red |
Viz Pack |
6 |
 |
 |
CHROME DIECAST SINGLE
FACE
Brilliantly chrome plated zinc diecast housing. Lens snaps over rubber
O-ring eliminating lens screws and retainer rings.
Two lead wires exit through 1/2" diameter hollow stud. |
| Order
Numbers |
Pack |
Std.
Carton |
V313-2
313-2 |
red
red |
Viz Pack
box |
6
12 |
 |
 |
SINGLE FACE TWO WIRE
Durable, black ABS housing with snap-on red lens,
functions as a stop, turn and tail light.
Interchangeable with similar competitive units.
Two lead wires exit through 1/2" diameter hollow stud. |
| Order
Numbers |
Pack |
Std.
Carton |
V410-2
M410-2 |
red
red |
Viz Pack
mfg. pack |
6
48 |
 |
 |
SINGLE FACE
Heavy gauge steel housing with baked black enamel finish. Two lead wires
exit through 7/16" hollow mounting stud. Supplied with Lexide lens
gasket and standard 4 1/4" lens retained by wire snap ring. |
M413
M413S
M413-3 |
red
red
red
stainless steel-red
red w/reflector |
Viz Pack
poly pack
mfg. pack
poly pack
mfg. pack |
6
12
48
48
48 |
 |
 |
FLUSH MOUNT
Double wire, flush mount provides stop, turn and tail light functions. 413
series have a sturdy plastic housing with a black finish. M413S series
features 304 stainless steel housing and retainer ring. 413-3 has
reflector optics around the periphery of lens which eliminates the need to
mount and maintain a separate reflector. All use a brass socket and Lexide
lens gasket. |
| Order
Numbers |
Pack |
Std.
Carton |
 |
V417KR
M417R |
red rear
red |
Viz Pack
mfg. pack |
6
48
|
 |
 |
PIRANHA®
LED STOP TURN AND TAIL LIGHT
Round, 4", 39-diode LED
light that functions as a stop, turn, and tail light.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 16 volts.
Does not require "Top" positioning to meet
FMVSS 108 photometeric requirements.
Available in manufacturer's pack, poly pack, or visual pack kits.
Kits include 417 LED light, 426-18 mounting grommet,
and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
V417KR-2
M417R-2 |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
|
PIRANHA®
LED STOP TURN AND TAIL LIGHT
New, brighter 10-diode design, round, 4",
LED light
that functions as a stop, turn, and tail light.
Features a sealed, polycarbonate lens and housing.
Increased operating range from 8 to 32 volts
meets both FMVSS 108 and ECE requirements.
Does not require "Top" positioning.
Available in manufacture's pack or visual pack kits.
Kits include 417-2 LED light, 426-18 mounting grommet,
and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
|
V417KTA
M417TA |
amber
rear kit
amber |
Viz Pack
mfg. pack |
6
48 |
 |
 |
AUXILIARY
PIRANHA® LED REAR TURN AND PARKING LIGHT
Round, 4", 39-diode LED
light that functions as
both auxiliary rear turn and parking light.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 16 volts.
Available in manufacturer's pack or visual pack kits.
Kits include 417TA LED light, 426-18 mounting grommet,
and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
| 417R-11K |
red kit |
poly
pack |
8 |
 |
 |
PIRANHA® LED SEALED
STOP, TURN & TAIL KIT
Piranha® LED
kits are designed to replace Hella 4.50" x 5.38" rectangular
light assemblies. Galvanized steel mounting bracket and polycarbonate
bezel for corrosion and heat resistance. Each kit contains light,
mounting bracket, bezel, connector/harness and assembly instructions. |
| Order
Numbers |
Pack |
Std.
Carton |
|
V418KR
M418R |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
 |
FLANGE-MOUNT
PIRANHA® LED STOP TURN AND TAIL LIGHT
Round, 4", 39 Diode LED
light that functions as a stop, turn, and tail light.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 16 volts.
Does not require "Top" positioning to meet
FMVSS 108 photometeric requirements.
Available in manufacturer's pack or visual pack kits.
Kits include 418 LED light, and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
V418KR-2
M418R-2 |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
|
FLANGE-MOUNT
PIRANHA® LED STOP
TURN AND TAIL LIGHT
New, brighter 10-diode design, round, 4", LED
light
with flange-mount that functions as a stop, turn, and tail light.
Features a sealed, polycarbonate lens and housing.
Increased operating range from 8 to 32 volts
meets both FMVSS 108 and ECE requirements.
Does not require "Top" positioning.
Available in manufacturer's pack or visual pack kits.
Kits include 418-2 LED light, and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
418SA
418SR |
amber
red |
poly
pack
poly pack |
6
6 |
 |
|
AUXILIARY
FLANGE-MOUNT
PIRANHA® LED STROBE/WARNING LIGHT
Round, 4", LED
strobe light
with flange-mount that may be used as an auxiliary strobe or warning
light.
Perfect for emergency vehicles, construction equipment, and refuse
vehicles.
Features a sealed, polycarbonate lens and housing.
Operates from 8 to 16 volts and contains a built-in power unit.
May be used with or without an external flasher.
Includes multi-strobe flash function: dual-strobe when connected to the
tail function or quad-strobe when connected to the stop function.
Available in amber or red colored light. |
| Order
Numbers |
Pack |
Std.
Carton |
418YA
418YA-24V |
amber
amber |
poly
pack
poly pack |
6
6 |
|
|
AUXILIARY
FLANGE-MOUNT
PIRANHA® LED BULLS-EYE
REAR TURN/WARNING LIGHT
Round, 4", LED
amber light with flange-mount
that may be used as an legal rear-turn
or mid-turn signal, or a warning-flasher light.
Features a sealed, polycarbonate lens and housing.
Operates from 8 to 16 volts or offered in a 24 volt model
(-24V denotes 24 volt light).
May be used with or without an external flasher.
|
| Order
Numbers |
Pack |
Std.
Carton |
V418KTA
M418TA |
amber
kit
amber |
Viz Pack
mfg. pack |
6
48 |
|
|
FLANGE-MOUNT
PIRANHA® AMBER LED
REAR TURN AND PARKING LIGHT
Round, 4", LED
amber light
that functions as both auxiliary rear turn and parking light.
Does not require "Top" positioning to meet
FMVSS 108 photometric requirements.
Available in manufacturer's pack or visual pack kits.
Kits include 418TA LED light and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
M419
M419-24V |
.
24 volt |
mfg.
pack
mfg. pack |
36
36 |
 |
 |
COMBINATION REAR LIGHT
Red lens provides stop and tail functions while amber lens serves as
turn signal or flashing warning light. OEM use on construction and Ag
equipment. Designed to be used on vehicles under or over 80" wide.
Lexan® base and lenses are heat and impact resistant. Two screws
securely hold each lens in place and allow for easy bulb replacement.
Lens gasket seals out dirt and moisture, extending bulb life and
insuring corrosion resistance.
Easily mounts with two 5mm studs on 2 7/8" centers.
Meets ECE requirements.
Available in 24 volt. |
| Order
Numbers |
Pack |
Std.
Carton |
|
V420KR
M420R |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
 |
PIRANHA®
LED STOP, TURN AND TAIL LIGHT
Sealed, oval LED
stop, turn, and tail light
that may be used for both over 80" and under 80" applications.
Meets FMVSS 108 photometric requirements
in horizontal, vertical, or any 360-degree position.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 32 volts.
Available in manufacturer's pack or visual pack kits.
Kits include 420 LED light, 421-18 mounting grommet,
and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
V420KR-2
M420R-2 |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
|
PIRANHA®
LED STOP, TURN AND TAIL LIGHT
Features our new, brighter 10-diode design.
Sealed, oval LED
stop, turn, and tail light
that may be used for both over 80" and under 80" applications.
Meets FMVSS 108 photometric requirements
in horizontal, vertical, or any 360-degree position.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 32 volts.
Available in manufacturer's pack or visual pack kits.
Kits include 420-2 LED light, 421-18 mounting grommet,
and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
| M421HR |
red |
mfg pack |
48 |
 |
 |
SEALED SURFACE-MOUNT
OVAL STOP, TURN, AND TAIL LIGHT
A sealed oval stop, turn, and tail light that may be mounted in either
horizontal or vertical position.
Polycarbonate lens is sonic welded to the housing to form a single unit.
Light is sonic welded to a surface-mount bracket to form a single unit.
Meets both FMVSS 108 and ECE requirements in either position. |
| Order
Numbers |
Pack |
Std.
Carton |
|
V421R
V421KR
421R
M421R
421R-24V
421KR
M421KR |
red
red
red
red
red
red kit
red kit |
Viz Pack
Viz Pack
poly pack
mfg. pack
poly pack
poly pack
mfg. pack |
6
6
12
48
12
12
48 |
 |
|
SEALED STOP, TURN
& TAIL LIGHT
Lexan® housing and lens are sonic welded to provide a permanent seal.
Two filament bulb.
Unit is legal in either the vertical or horizontal mounting position
for both U.S. and ECE applications. -24V denotes 24 volt light.
See 416
back-up and 421A
turn signal, for companion models.
Grommet and plug are available separately.
Kits include 421R light, 421-18 grommet and 421-491
plug.
Interchangeable with all competitive units. |
| Order
Numbers |
Pack |
Std.
Carton |
| 422R |
complete
unit |
box |
12 |
 |
 |
PEDESTAL MOUNT
Durable, molded housing holds a sealed 426R stop, turn and tail light. The
corrosion-proof and vibration absorbing characteristics of this series
make it well suited for harsh applications. In addition to a stop and tail
light, this series can be used as a warning light in agricultural or
construction applications.
Meets ECE requirements. |
| Order
Numbers |
Pack |
Std.
Carton |
| 423QA |
sequential |
poly
pack |
6 |
 |
 |
AUXILIARY
FLANGE-MOUNT
PIRANHA® LED SEQUENTIAL SIGNAL LIGHT
Sealed, oval LED
amber light with flange-mount
for auxiliary applications such as a mid-turn signal or warning light.
Cycles through multiple sequential arrows until
fully illuminated.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 16 volts. |
| Order
Numbers |
Pack |
Std.
Carton |
|
V423KR
M423R |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
|
FLANGE-MOUNT
PIRANHA® LED
STOP, TURN AND TAIL LIGHT
Sealed, oval LED
stop, turn, and tail light with flange-mount
that may be used for both over 80" and under 80" applications.
Meets FMVSS 108 photometric requirements
in horizontal, vertical, or any 360-degree position.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 32 volts.
Flange-mounted lamp may be riveted
to the vehicle/trailer body for theft protection.
Available in manufacturer's pack or visual pack kits.
Kits include 423 LED light and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
V423KR-2
M423R-2 |
red kit
red |
Viz Pack
mfg. pack |
6
48 |
 |
|
FLANGE-MOUNT
PIRANHA® LED
STOP, TURN AND TAIL LIGHT
Features our new, brighter 10-diode design.
Sealed, oval LED
stop, turn, and tail light with flange-mount
that may be used for both over 80" and under 80" applications.
Meets FMVSS 108 photometric requirements
in horizontal, vertical, or any 360-degree position.
Features a sealed, polycarbonate lens and housing
and operates from 8 to 32 volts.
Flange-mounted lamp may be riveted
to the vehicle/trailer body for theft protection.
Available in manufacturer's pack or visual pack kits.
Kits include 423-2 LED light and 417-491
adapter plug. |
| Order
Numbers |
Pack |
Std.
Carton |
| M424R |
red |
poly
pack |
48 |
 |
 |
FLANGE MOUNT SEALED
STOP, TURN AND TAIL
Lexan® housing and lens are linear welded to provide a permanent seal.
Bulb is protected from road shock and vibration with PM's patented VIBAR®
socket. Flange is molded of high impact plastic.
Mounts with three screws or rivets in 4 1/2" hole.
A 431-491
plug is necessary to complete installation.
Meets ECE requirements. |
| Order
Numbers |
Pack |
Std.
Carton |
M425S
M425-3 |
stainless
steel red
red w/reflex |
mfg.
pack
mfg. pack |
48
48 |
 |
|
VIBAR® FLUSH MOUNT
Double wire stop, tail and turn signal. 425 series features heavy gauge
steel housing with baked, black enamel finish. Patented VIBAR® socket
cushions and isolates bulb from road shock and vibration, greatly
extending bulb life. M425S features a satin finish stainless steel
housing.
M425-3 includes reflex reflector optics around the periphery of the
lens. |
 
|
Part #
|
Description
|
Price
|
Add
to Cart
|
421R
|
Red
Bulk
|
$10.69
|
|
V421R
|
Red
Viz Pack
|
$14.28
|
|
V426R
|
Red
Viz Pack
|
$11.01
|
|
421-18
|
Grommet
|
$3.10
|
|
421-491
|
Pig
Tail
90°
3-Way
|
$2.74
|
|
V426R
|
Red
Viz Pack
|
$11.01
|
|
V426KR
|
Red
Viz Pack Kit |
$15.01 |
|
|
426R |
Red
|
$9.89 |
|
M426R
|
Red
bulk
|
$4.45
|
|
426-18
|
Grommet
|
$1.71
|
|
431-491
|
Pig
tail |
$3.04
|
|
V457
|
Stop
& Turn Light |
$19.16
|
|
V457L
|
Stop
& Turn Light w/license plate holder |
$20.39
|
|
SEALED STOP, TURN AND
TAIL LIGHT
Lexan® housing and lens are permanently sealed to eliminate corrosion.
The bulb is cradled in PM's patented VIBAR® socket which literally floats
the bulb filaments soaking up road shock and vibration. Used with plug 431-491
for a completely weather-tight electrical connection.
-24V denotes 24 volt unit.
2668 is high heat resistant version of 426.
Grommet and plug are available separately.
Kit includes light, grommet and plug.
Interchangeable with all competitive units.
426R stop, turn and tail lights meet ECE requirements. |
| Order
Numbers |
Pack |
Std.
Carton |
426R-11K
2668R-11K |
red kit
high heat red kit |
poly
pack
poly pack |
8
8 |
 |
|
SEALED STOP, TURN
& TAIL KIT
Kits are designed to replace Hella 4.50" x 5.38" rectangular
light assemblies. Galvanized steel mounting bracket and polycarbonate
bezel for corrosion and heat resistance. Each kit contains light,
mounting bracket, bezel, connector/harness and assembly instructions.
Meets ECE stop, turn and tail light requirements. |
| Order
Numbers |
Pack |
Std.
Carton |
M427R
427R-24V
427KR |
red
red
red kit |
poly
pack
poly pack
poly pack |
48
12
12 |
 |
|
SEALED STOP, TURN AND
TAIL LIGHT
Lexan® housing and lens are permanently sealed to eliminate corrosion.
The bulb is cradled in PM's patented VIBAR® socket which literally
floats the bulb filaments soaking up road shock and vibration. Used with
plug 431-491
for a completely weather-tight electrical connection. -24V denotes 24
volt unit. 427
features the addition of reflector optics around the periphery of the
lens. Eliminates mounting and maintaining separate rear reflectors.
Grommet and plug are available separately.
Kit includes light, grommet and plug.
Interchangeable with all competitive units. |
| Order
Numbers |
Pack |
Std.
Carton |
V428
428
V428S
428S
M428S
V428W
M428W |
with
illuminator
with illuminator
w/o illuminator
w/o illuminator
w/o illuminator
with illuminator
with illuminator |
Viz Pack
box
Viz Pack
box
mfg. pack
Viz Pack
mfg. pack |
6
24
6
24
60
6
60 |
 |
 |
428 SERIES
3 3/4" diameter wrap-over lens retained by two screws. Black,
plastic housing is dust resistant. All Units supplied with 10" lead
wires.
UNIVERSAL STUD MOUNT
Mounts with two 1/4" studs on 2" centers. 428S is without
license illuminator. 428 and 428W has license illuminator. |
| Order
Numbers |
Pack |
Std.
Carton |
430L
430R |
red -
left
red -right |
box
box |
12
12 |
 |
 |
MODULE
Five function light serves as stop, turn and tail, reflector and rear
clearance. Lexan® lens and housing are durable and corrosion proof.
Patented VIBAR® socket insures prolonged bulb life. Color coded lead
wires exit on inboard side of each light for universal application.
Must be ordered in right for left models. |
| Order
Numbers |
Pack |
Std.
Carton |
V440
V440L
440
440L
M440
M440L |
w/o
license illuminator
w/license illuminator
w/o license illuminator
w/licence illuminator
w/o license illuminator
w/licence illuminator |
Viz Pack
Viz Pack
box
box
mfg. pack
mfg. pack |
6
6
12
12
48
48 |
 |
 |
COMBINATION LIGHT
Designed with a clean look that compliments any trailer. Tough molded
housing and lenses with phosphor bronze contacts make this series very
durable. Exceeds DOT requirements for: stop, tail, turn, rear and side
reflector, side marker and license illuminator. Aftermarket units
supplied with lead wires and mfg. pack lights feature push-in
connections. Two extra plug-in connections provide for convenient hook
up of other lights.
Legal for trailers under 80" wide. |
| Order
Numbers |
Pack |
Std.
Carton |
M441
M441L |
w/o
license illuminator
w/license illuminator |
mfg. pack
mfg. pack |
48
48 |
 |
|
SUBMERSIBLE COMBINATION
LIGHT
"Belljar" submersible version of our 440
tail light. Gasketed lenses provide an air pocket to prevent water from
reaching the bulb. Exceeds DOT requirements for: stop, tail, turn signal,
rear and side reflector, side marker light and license illuminator.
Legal for trailers under 80" wide. |
| Order
Numbers |
Pack |
Std.
Carton |
442
442L |
w/license
illuminator
w/license illuminator |
box
box |
12
12 |
 |
 |
COMBINATION LIGHT
Universal, OEM style replacement for Chevrolet/GMC, FORD and
International. Three 1/4" diameter mounting studs on 2"
triangular pattern. Junction box has universal terminals.
Interchangeable with competitive units.
442 Replaces:
Chevrolet/GMC 715104, 795059 (right side)
Ford D9HZ-13405B
IH 467708 C91, 424539 C91, 590158 C91
442L Replaces:
Chevrolet/GMC 715103, 795058 (left side)
Ford D8HZ-13404A
IH 467707 C91, 424538 C91, 590157 C91 |
| Order
Numbers |
Pack |
Std.
Carton |
M444
M444L |
no license
illuminator
w/license illuminator |
mfg. pack
mfg. pack |
48
48 |
 |
 |
COMBINATION LIGHT
Designed with all the features of our popular 440
series including a rear clearance light for over 80" wide
applications. Exceeds DOT requirements for: stop, turn, tail, rear and
side reflector, side marker and rear clearance. Roadside light contains
license illuminator. |
| Order
Numbers |
Pack |
Std.
Carton |
V445
445 |
w/license
illuminator
w/license illuminator |
Viz Pack
box |
6
12 |
 |
 |
UNIVERSAL COMBINATION
Universal light features three 1/4" diameter mounting studs on
2" triangular pattern. Durable, molded housing will never corrode.
Sealed wire loom harness with three lead wires. Will fit Peterbilt, Mack,
White and Jeep. |
| Order
Numbers |
Pack |
Std.
Carton |
V451
V451L
M451
M451L |
right side
left side
right side
left side |
Viz Pack
Viz Pack
mfg. pack
mfg. pack |
6
6
48
48 |
 |
 |
SUBMERSIBLE COMBINATION
LIGHT
Low profile rectangular styling utilizing the proven "Belljar"
concept. License illuminator slides out for easy bulb service and other
electrical connections. Exceeds DOT requirements for: stop, turn, tail,
rear reflector, clearance, side reflector, side marker and license
illuminator. Units supplied with lead wires.
Legal for trailers under 80" wide. |
| Order
Numbers |
Pack |
Std.
Carton |
V452
V452L
M452
M452L |
w/o
license illuminator
w/license illuminator
w/o license illuminator
w/license illuminator |
Viz Pack
Viz Pack
mfg. pack
mfg. pack |
6
6
48
48 |
|
|
SUBMERSIBLE
COMBINATION LIGHT
Designed with all the features of our popular 441
series including a rear clearance light for over 80" wide
applications. "Belljar" submersible design prevents water from
reaching the bulbs and contacts. Exceeds DOT requirements for: stop,
turn, tail, rear and side reflector, side marker and rear clearance.
Roadside light contains license illuminator. |
| Order
Numbers |
Pack |
Std.
Carton |
V457
V457L
M457
M457L |
w/o
license illuminator
w/license illuminator
w/o license illuminator
w/license illuminator |
Viz.
Pack
Viz Pack
mfg. pack
mfg. pack |
6
6
48
48 |
 |
 |
STOP AND TAIL
Multi-function tail light exceeds DOT requirements for stop, turn, tail
and rear reflector. M457L includes license illuminator and license plate
mounting bracket. High impact housing and lens will never corrode.
Grounds through mounting hardware. Commonly used on utility or
recreational-type trailers. |
|
Welcome to WholesaleMidwest.com!
We're a family business with big warehouses and small prices. If you can't
find a product, call us at 1-800-367-1253 or
e-mail us , and we'll be happy
to help you out. Thank you for stopping by!
-- The Marshall Family
