|
|
|
|
 Oil Hubodometer Hub Caps
Oil Hubodometer Specifications & Cross Reference Chart
|
|
Part # |
Description |
Price |
Add to Cart |
|
DG-6H |
6 Bolt Grease Hubodometer Hub Caps |
$8.60 |
|
|
DG-5/6H |
5 & 6 Bolt Grease Hubodometer Hub Caps |
$10.33 |
|
DG-7.5H |
6 Bolt Grease Hubodometer Hub Caps |
$9.27 |
|
|
DG-PH |
Threaded Grease Hubodometer Hub Caps |
$12.33 |
Grease Hubodometer Hub Cap Specification & Cross Reference Chart
| PART NUMBER | NO. OF BOLTS | HOLE SIZE | BOLT CIRCLE | I.D. (B) | O.D. (A) | MAX AXLE EXTD. (C) | HEIGHT (D) | CROSS REFERENCE STEMCO | CROSS REFERENCE CR |
| DG-6H DG-5/6H DG-7.5H DG-PH |
6 5 and 6 6 Threaded |
0.34 0.34 0.3 N/A |
5.5 5.5 6.75 N/A |
4.43 4.37 5.45 5.63 |
6.25 6.25 7.5 6.43 |
2.16 1.71 2.17 2.46 |
2.67 2.23 2.56 3 |
---- ---- ---- ---- |
---- ---- ---- ---- |
General
 | Original design vents and resists contamination.
| Hubodometer bolts directly to the face of the hub cap. No modifications
or brackets necessary. | |
| Highly crush-resistant at high flange pressures.
| Gaskets have a FULLY CURED nitride binder which will withstand wheel-end
temperatures up to 350 degrees. | |
| Lightweight, strong, durable, non-corrosive and weather-resistant.
| Allows for rapid heat dissipation.
| Solid one-piece construction WILL NOT BREAK... | |
| Allows for two-way air movement while protecting the wheel end from
outside contaminants.
| Designed to relieve wheel-end pressure and vacuum buildup.
| Provides excellent protection from water-filled loading docks and
high-pressure sprayers.
| Patented cover protects sintered bronze vent from becoming contaminated
with grease from inside the wheel end.
| Sintered bronze vent is nickel plated for exceptional corrosion
resistance. | |
| Unique design reinforces hub cap face and eliminates window breakage.
| Window manufactured from chemical and break-resistant Lexan that is
guaranteed for LIFE. | |
| Dual Dynamics pioneered the field with the grease hub cap, making the first
and the best.
| Tamperproof design eliminates costly mistakes of putting oil in grease
wheel-end applications. | |
Installation & Maintenance Instructions
Bolt-on hub caps:
Screw-on hub caps:All surface areas should be clean. Once cap and gasket are bolted into place, torque bolts in a crisscross order to 15-20 ft-lb.
All surface areas should be clean. Lubricate O-ring seal with gear lube currently being used in the hub. Screw on and tighten to 60 ft-lb.
Installation of Hubodometer
Insert the hubodometer shaft through the hole in the center of the hub cap. Install the washer and secure with the locknut provided. Torque the nut to 18-22 ft-lb.
We carry the full line of products by DUAL-DYNAMICS,
including CrossFire dual tire pressure equalization
systems, Grease Hubs, Load Locks and more. CLICK
HERE for our CrossFire page. For other products, call us at
1-800-367-1253 or
e-mail us.
|
We carry just about everything for trucking, trucks, cars and travel. If we don't have it in stock, we can probably find it. Just call us at 1-800-367-1253 or e-mail us at rodmarshall@windstream.net Please call with any questions prior to ordering. Click here to read our refund policy. For large orders or bulk pricing, call
1-800-367-1253 or e-mail us. We sell products made in America by American companies. This site maintained by Rainmakers Rhen Marshall, Inc. © 2001 |
